Fire Resistant Plastic Injection Molding Products , 110mm Oyster White Plastic Reducer
Plastic Reducer Injection Molding part is a special design for gear that is used to home appliances , plastic reducer is made from POM that is one of engineering materials with perfect insulation .
Plastic injection molding reducer has a threaded hole end with fixing clip beams that supports threaded rod or screw to secure pieces .
Material for Plastic Reducer for Gear Injection Molding
POM (Polarizing Optical Microscope )
Specification for Plastic Reducer for Gear Injection Molding
Length : 95 mm
Diameter : 18 mm
Threaded diameter : M8
Note : this reducer for gear injection molding part is customized according to special construction .
Tolerances for Plastic Reducer for Gear Injection Molding
| 0-3 |
0.2 |
| 3-6 |
0.24 |
| 6-10 |
0.28 |
| 10-14 |
0.32 |
| 14-18 |
0.38 |
| 18-24 |
0.44 |
| 24-30 |
0.5 |
| 30-40 |
0.56 |
| 40-50 |
0.64 |
| 50-65 |
0.74 |
| 65-80 |
0.86 |
| 80-100 |
1 |
Note :
1 , all are in mm and based on “ + “ “ –”tolerance
2 , for unspecified tolerance , based on ISO 2768-m with grade MT 7
Mechanical Property for Plastic Reducer for Gear Injection Molding
| Tensile strength MPa |
70 |
| Elongation at break % |
40 |
| Bending strength MPa |
90 |
| Modulus of elasticity for tension MPa |
3160 |
| modulus of elasticity for bending MPa |
2880 |
| Compressive strength MPa |
127 |
| Shearing strength MPa |
67 |
| Notched Impact Strength(J/m) |
76 |
| HR hardness |
94 |
| Fatigue MPa |
35 |
Thermal Performance for Plastic Reducer for Gear Injection Molding
| Heat distortion Temperature(1.82MPa)℃ |
110 |
| Normal working temperature ℃ |
80 |
| Working temperature arrange ℃ |
-40℃～90℃ |
| Coefficient of linear expansion (×10K) |
7.5 |
| Heat conduction W/(m·K) |
0.23 |
Physical Performance for Plastic Reducer for Gear Injection Molding
| Specific volume resistance Ω·cm |
10 |
| Specific inductive capacity(10Hz) |
3.8 |
| Dielectric loss tangent (10Hz) |
0.005 |
| Dielectric strength(kV/mm) |
20 |
| Arc-resistances |
220 |
Notes for Plastic Reducer for Gear Injection Molding
POM plastic Reducer Injection Molding part are easy to be cracked and pulverized outside long-term .
Don’t put POM plastic Reducer Injection Molding parts under temperature over 100℃
Don’t put POM plastic Reducer Injection Molding parts under circumstance with alkali and oxidant .
Product Tags:
|
|
Fire Resistant Plastic Injection Molding Products , 110mm Oyster White Plastic Reducer Images
|
